Kitchen cabinet door replacement means taking off worn cabinet doors and drawer fronts and fitting new ones on sound cabinet boxes. It is the right choice when you like your layout but not how it looks or works, and new cabinets make more sense when the boxes are damaged. Capital Construction, a family-owned, licensed contractor (license number 793440) with 20+ years of experience, does this work with an in-house crew. Ask for a free, no-obligation estimate to get started.
Call (916) 277-8282 for a free, no-obligation estimate.
When Kitchen Cabinet Door Replacement Makes Sense
Replacing cabinet doors makes sense when your layout works and the cabinet boxes are sound, but the doors and drawer fronts look worn or no longer fit your kitchen.
You may know the signs already. Cabinet doors sag, warp or chip. One will not close. The finish has worn through near the handles. The style feels dated, or the hinges no longer hold a screw. None of that means your whole kitchen has to go.
The test is the cabinet boxes. If the boxes and face frames are solid, square and dry, with no swelling or water damage, new doors will hang well on them. If the boxes are sagging or water damaged, new cabinets are the better spend.
If the boxes are solid, a door swap is often enough. If they are damaged, or the layout no longer works for how you cook and live, new cabinets or a full kitchen remodel make more sense. Cabinet refacing, repainting and replacing are different paths, and this guide on whether to reface, repaint or fully replace cabinets can help you compare.

Our Cabinet Door Replacement Process
You start with a free, no-obligation estimate, choose materials in our showroom, and our in-house crew does the work. If you also want new boxes, see our cabinet installation and custom cabinets.
- Ask for a free, no-obligation estimate by phone or online. We offer online estimates.
- Choose your materials in our showroom at 4815 Auburn Blvd.
- Our in-house crew does the work, no subcontractors, including the installation of your new cabinet doors and drawer fronts.
- The work carries our 1-year labor warranty.
Every step is built around your vision for the kitchen, so the replacement cabinet doors look the way you pictured them.

How to Measure for Replacement Cabinet Doors and Drawer Fronts
Measure each opening to the nearest 1/16 inch, take more than one reading, and match the measurement to your overlay type.
Measure each door and drawer front, note the hinge type, and check whether the doors sit over the frame or inside it. New drawer fronts are measured with the doors so the whole set lines up. For more, read our guide on keeping drawers aligned.
Overlay and inset
Overlay is how much of the face frame the door covers. A partial-overlay door covers about 1/2 inch of the frame on all sides. A full overlay covers 1 to 1-1/4 inches. Inset doors sit inside the frame, so for inset doors you subtract about 1/4 inch from the opening. The overlay type decides how far each door reaches across the frame.
Choosing a door style and finish
Your door style sets the look of the room. Shaker doors have a simple frame with a recessed center. Flat panel doors are smooth and clean. Raised panel doors have a shaped center with more detail. Pick the one that fits your kitchen and your vision, then pick a finish to match.
Custom sized doors are one more option to talk through when your openings are not standard.
Replacement Cabinet Door Materials
| What goes into your cabinet doors | What it means for the work |
|---|---|
| Door style | Shaker, flat panel and raised panel doors are built differently. |
| Material | Solid wood and MDF are different materials to work with and finish. |
| Finish | A stained, painted or paint grade surface each needs its own finish step. |
| Custom sizing | Comes up when openings are not standard. |
| Number of doors and drawer fronts | More pieces mean more work and material. |
| Hinges and hardware | Soft-close hinges and pulls are hardware choices to make with the doors. |
| Condition of existing boxes and face frame | Sound boxes can be reused. Damaged ones may need repair. |
Solid wood and MDF are common door materials, and a paint grade door is meant for a painted finish. It comes down to the look you want.
Soft-close hinges and new hardware are choices to consider along with new doors.

Permits, Contracts and Older Homes
Replacing cabinet doors on its own does not need a permit: California's residential code lists cabinets and similar finish work as exempt. An exemption never permits work that breaks the code.
Permits
The 2025 California Residential Code lists cabinets, counter tops and similar finish work among work exempt from a permit. An exemption does not authorize work that violates the code.
Your written contract
A California home improvement contract must be in writing and signed before work begins. It must list the contractor's name, business address and license number.
Homes built before 1978
EPA's RRP Rule requires anyone paid to disturb painted surfaces in homes built before 1978 to be lead-safe certified. This covers all firms, including sole proprietorships. If your home was built before 1978, ask any contractor for their EPA lead-safe certification before work starts.
Composite panels
California's composite wood program covers formaldehyde emissions from hardwood plywood, particleboard and MDF panels. It also covers finished goods such as cabinets made from them. It applies to products sold, supplied, used or manufactured for sale in California.
Why Homeowners Choose Capital Construction
Trust comes before technical detail, so here is who you would be working with when you hire us for cabinet doors.
- Family-owned business
- 20+ years of experience
- In business since 2001
- Licensed contractor, license number 793440, and insured
- Free, no-obligation estimates, with online estimates offered
- Showroom at 4815 Auburn Blvd for selecting materials
- Work done by an in-house crew, no subcontractors, from installation to the last check
- 1-year labor warranty
- 700+ happy clients
Work in someone's home carries weight, and we treat it that way.
Kitchen Cabinet Door Replacement FAQs
Will new replacement cabinet doors work with my existing face frames and hinges?
Usually yes, when the boxes are sound and the doors are matched to the face frame and overlay type.
Can I replace only a few damaged cabinet doors instead of the whole set?
Yes, it is possible. Matching the door style and finish to the rest is the hard part, so a full set often looks more even. We talk through both options at the estimate.
Can you replace just the cabinet doors?
Yes. If the cabinet boxes are sound, we replace the doors and drawer fronts and adjust the hinges so everything closes evenly. If the boxes are worn out, we can talk about new cabinets or a full kitchen remodel instead.
Who handles kitchen cabinet door replacement near me?
Capital Construction does. We are a family-owned, licensed contractor (license number 793440) with a showroom at 4815 Auburn Blvd in Sacramento. Call (916) 277-8282 or request an online estimate.
Do cabinet doors need a permit to replace?
The California Residential Code lists cabinets and similar finish work as permit-exempt, which is not a license to break code. The exemption never authorizes work that violates the code.
Call (916) 277-8282 for a free, no-obligation estimate on your kitchen cabinet doors.

















